Cold rooms
Cold leaking at panel joints and pipe penetrations — the panel is fine, the seam is not.
Component ASee the methodApplications
Where one-component foam earns its place
From cold rooms to sunrooms: what these jobs have in common is movement, an awkward shape and a short window to do the work. That is the same problem eight times.
Eight site conditions
Pick the page that matches the job
Pipes and valves
Pre-formed sections cannot wrap a valve body or a reducing tee.
Component ASee the methodRoofs
Retrofit: the deck cannot come off, the tenant cannot move out.
Component SSee the methodWindows and doors
Openings are never square; the gap varies around the same frame.
Component ASee the methodSteel frame houses
Cavities behind the boards stay empty where a gun cannot reach.
Component ASee the methodContainers
Condensation on the steel, dripping onto whatever is stored.
Component SSee the methodBasements
Seepage on the negative side, where no membrane can be applied.
Component ASee the methodSunrooms
The roof bakes by 3 p.m. and the room becomes unusable.
Component ASee the methodSelection
Scenario to grade, in one table
| Scenario | Grade | Why |
|---|---|---|
| Cold rooms | A | Joints and penetrations, class I adhesion |
| Pipes and valves | A | Valves stay removable, two-pass filling |
| Roofs | S | Cavity filling from underneath |
| Windows and doors | A | Frames that carry a sash |
| Steel frame houses | A / C | Primary air barrier, or cost per bay |
| Containers | S | Non-structural cavity, fast conversion |
| Basements | A | Dry side, behind a drained cavity |
| Sunrooms | A | Frame line, sealed and drained |
Typical values for orientation only. Final parameters are confirmed for the selected grade and your filling conditions.
Tell us the application — we will send the matching parameters.
Technology brand
Tell us the application and the substrate
- 1 tonne minimum, five 200 L drums
- SDS, COA and Form E with every shipment
- We reply within 24 hours, Monday to Saturday.